Frequently Asked Questions
Curtain Rods
Q: I need a 200" heavy duty two way pull traverse rod and I need a 265" heavy duty right hand pull traverse rod.
A: You can use a two way rod to make a one way right rod, as a one way right rod does not come in that size. A rod this size will come all strung up, but will be in sections so that it can be put in a reasonable sized box. To make the one way right rod just take off the left hand side master carrier and then put the smaller carriers that were on the left hand side all over on the right hand side. This will make a right draw. The other split draw you asked for is available in the size you requested without any modifications.
|
| |
Q: I am considering Levolor or Timber Blinds for a 2 inch faux wood blind project. Which of these brands makes the better product? And why?
A:
Differences:
Levolor
- Larger selection
- Brand identity
- One of three major companies that architects specify on major projects (other 2 are Hunter Douglas and Springs/Graber), higher priced.
Timber/Kings River Blinds
- Wood colors not embossed
- Smooth finish only
- Much nicer valance
- Heavier tilt cords
- Heavier lift cords
- Budget priced
Similarities:
- Same bottomrails
- Same solid vinyl slats and slat ladders
- Same heavy duty headrail and components
- Same years of use
- Same Limited Lifetime Warranty
Conclusion: It's a toss up on quality as they both have quality headrails and components. It just comes down to would you rather have a specific brand name or save money.
|
Q:
I was wondering if or where I can get a tension rod for the front window of my motorhome. It need to span 96 inches.
A:
Thank you for your inquiry. I am not aware of any manufacturer who makes a spring tension rod that wide. What I have personally done in the past to achieve longer lengths is to take two rods sets and take the smaller end from one rod set and put it into the larger sized rod of the other rod set, on the end that doesn't have the smaller rod in it. I have drilled a hole through both rods and put a small screw so the rod did not move. Leave the other end alone and it will still move and work as the tension rod. Because of the extra long length I would suggest using a shower curtain rod to accomplish this as a standard sized rod will not be heavy duty enough and as a result sag and the springs are not strong enough on the smaller rods to work with that large a span.
|
Q:
I am interested in purchasing curtain rods for house. What are components, I want to make sure I order correctly. Example, Pole, 2 end caps, 15 rings. what do you mount this (what is it called). Are their special nails used to mount rod. And do the rings have hooks on them or do I purchase that separately.
A:
Typically a rod set consists of the rod, brackets, rings, finials, and hardware to install the rod. There are several different types of rods. There are wooden rods, metal rods, and rods that are made of a hard substance called resin. There are different types of brackets as well, that will match whichever rod you choose, they can be metal, or wood. The rings also come in different styles, or some rods don't have rings. You put rod-pocket curtains on these. Some rods have slides that you put hooks into. These are called traversing rods. They are used for pinch pleated draperies, the ones you can slide or pull open with a cord. There is also a baton option. It hooks onto the track and you can use it to slide open the curtains, like the ones that are common in hotel rooms. There are also rings that slide onto the rod and have alligator clips that grab onto the material and you can pull the draperies open with your hands. The finials are the decorative end pieces that screw onto both ends of the rod. You can find these in all styles, shapes and colors. Some of them you can mix and match with different rods. The hardware,(nails)are actually screws that you use. Screws are stronger and can be used with anchors to hang your rod on the wall. It is best to find a stud in the wall to put the screws into. The rod will have a better grip on the wall, and that way you won't have problems with sagging or the rod falling off the wall.
As I have explained, there are many different options for you. Another thing to be wary of when installing brackets, especially wood or resin is thay you can get your screw started with a drill, but you should always hand finish the tightening. I can tell you by personal experience having split out brackets by using the drill only. I now hand tighten the final 3 to 4 turns to keep from splitting the bracket. When you go on the website, click on curtain rods in the blue top section of the page. Then, click on either decorative rods, wooden rods, or metal rods. Just go trough them and find a style that you like, and give us a call, and we will walk you through the ordering process. We can also answer any more questions that you may have. We look forward to talking with you. If you need anything else, just give us a call. We are here for you and your decorating needs!
|
Q:
Can Heavy Duty Flexible Curtain Track be used in an outdoor installation,
and can it be painted? I am trying to make a solar shade, and would work perfect.
A:
It would work perfect outdoors as it is a heavy plastic/vinyl track that
has a thin piece of metal inside it. I have never tried painting the track, but
am sure it is paintable with the new plastic spray paints that are out. My opinion
is that the medium duty is usually suitable for most installs. The heavy duty
is just tougher to bend, -- it does bend, just not as tight a radius as the medium
duty.
I have added a link to the flex track for your convenience:
http://www.interiormall.com/cat/ndisplaycoll.asp?c1=Curtain+Rods&book=142 |
Q:
I
am trying to figure out what factors go into designing and decorating
a room for a client. Is it primarily furniture only?
A:
The primary factors are:
- Space
- Style
- Color
- Function
|
| |
| |
| |
| |
| |
| |
|
